Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000052766
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000052773
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000052778
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000052781
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000052808
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000052813
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circui
- OT-2026-000052814
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacu
- OT-2026-000052820
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000052821
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circui
- OT-2026-000052826
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacu
- OT-2026-000052828
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000052833
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000052838
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052842
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052845
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000052846
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000052850
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052854
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000052857
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000052858
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052862
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052866
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000052869
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000052870
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052874
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000052877
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000052878
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052882
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000052889
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ve
- OT-2026-000052890
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circ
- OT-2026-000052902
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circ
- OT-2026-000052909
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ve
- OT-2026-000052914
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circ
- OT-2026-000052921
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ve
- OT-2026-000052928
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000052933
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ve
- OT-2026-000052936
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000052950
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052953
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000052954
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000052978
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000052982
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000052985
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000052986
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000052990
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000052994
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000052997
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000052998
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000053002
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000053009
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th