Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000051177
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051178
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000051181
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent
- OT-2026-000051182
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000051183
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workp
- OT-2026-000051185
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051186
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000051189
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051190
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000051193
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent
- OT-2026-000051195
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000051197
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the
- OT-2026-000051207
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000051214
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whil
- OT-2026-000051218
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000051219
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000051221
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vente
- OT-2026-000051222
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000051225
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vente
- OT-2026-000051226
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve whil
- OT-2026-000051229
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by t
- OT-2026-000051230
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000051231
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000051233
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vente
- OT-2026-000051234
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000051237
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vente
- OT-2026-000051238
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051241
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000051242
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051243
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000051246
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051249
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000051250
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051254
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051255
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000051257
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000051258
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051262
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051266
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051267
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000051270
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051274
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051277
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000051278
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051279
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000051282
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051286
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000051289
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000051290
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by
- OT-2026-000051291
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work