Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000033322
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, t
- OT-2026-000033331
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is b
- OT-2026-000033334
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033338
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033342
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000033343
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000033346
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033350
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033354
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000033355
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000033356
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000033357
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpi
- OT-2026-000033358
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033362
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000033366
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033367
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000033368
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000033369
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpi
- OT-2026-000033370
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033374
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000033378
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033379
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000033380
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000033381
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000033382
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033386
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000033390
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000033392
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000033393
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000033395
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is b
- OT-2026-000033404
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000033405
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000033407
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is b
- OT-2026-000033413
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000033414
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000033416
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000033418
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000033419
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000033422
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000033425Three cup vacuum gripper, three outlet manifold, three stage ejector, pulsed blow-off after set-down
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is
- OT-2026-000033426
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000032786
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000032797
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-do
- OT-2026-000032798
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000032809
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-do
- OT-2026-000032815
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000032821
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000032823
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000032824
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000032829
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi