Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000031118
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The
- OT-2026-000031121
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031122
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The
- OT-2026-000031125
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031126
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The arrang
- OT-2026-000031128
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000031129
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000031130
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The
- OT-2026-000031133
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031134
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The
- OT-2026-000031137
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031138
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000031140
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000031141
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000031142
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031145
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031146
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031149Three cup vacuum gripper, three outlet manifold, three stage ejector, pulsed blow-off after set-down
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000031150
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000031152
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000031153
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031154
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031157Three cup vacuum gripper, three outlet manifold, three stage ejector, pulsed blow-off after set-down
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000031158
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031161
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031162
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000031163
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000031164
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000031165
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031166
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031170
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031174
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000031175
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000031176
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000031178
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031182
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031186Foam pad vacuum gripper, common isolation valve, three stage ejector, pulsed blow-off after set-down
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000031187
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000031189
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000031190
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031193
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000031194
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031197
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000031198Foam pad vacuum gripper, common isolation valve, three stage ejector, pulsed blow-off after set-down
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valv
- OT-2026-000031199
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workp
- OT-2026-000031201
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000031202
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031205
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000031206
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000031209
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-