Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000031397
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by th
- OT-2026-000031398
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000031401
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000031402
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000031405
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000031406
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000031407
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000031408
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000031409
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl
- OT-2026-000031410
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000031413
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031414
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve.
- OT-2026-000031417
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031418
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000031419
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000031420
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000031421
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl
- OT-2026-000031422
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000031425
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031429
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031431
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000031432
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000031433
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl
- OT-2026-000031436
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000031437
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031440
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000031441
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031443
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000031444
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000031445
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl
- OT-2026-000031446
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000031448
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000031449
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031450
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the bl
- OT-2026-000031452
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000031453
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031454
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the bl
- OT-2026-000031455
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000031456
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000031457
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl
- OT-2026-000031458
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the bl
- OT-2026-000031460
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000031461
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031462
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the bl
- OT-2026-000031464
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000031465
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece
- OT-2026-000031466
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. T
- OT-2026-000031467
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the work
- OT-2026-000031468
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000031469
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is bl