Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000014889
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014891
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000014892
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014894
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, th
- OT-2026-000014895
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000014899
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014902
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014903
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000014904
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014907
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000014911
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014914
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014915
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014916
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014919
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014923
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014925
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000014926
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014927
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014928
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014931
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014935
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014938
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014939
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014943
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014945
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014947
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000014950
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014951
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000014955
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000014957
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014958
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014959
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000014963
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000014967
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000014969
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014971
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014972
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000014975
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014979
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014981
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014983
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014984
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000014987
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014991
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014993
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000014994
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000014995
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014996
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000014999
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i