Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000011840
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011841
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000011843
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011844
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011845
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011846
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011848
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011849
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011850
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011851
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000011853
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011854
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011855
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011856
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011858
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011859
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011860
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011861
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011863
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000011864
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011865
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011866
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011868
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011869
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011870
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011871
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011873
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011874
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011875
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011876
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011878
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000011879
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011880
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011881Two pad foam vacuum gripper, two outlet manifold, two stage ejector, pulsed blow-off before set-down
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011883
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011884
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011885
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011886
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011888
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011889
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011890
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011891
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011894
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011895
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011896Two pad foam vacuum gripper, two outlet manifold, two stage ejector, pulsed blow-off before set-down
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000011899
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011900
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000011901
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000011904
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011905
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off