Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000010319
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000010320
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented
- OT-2026-000010325
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented
- OT-2026-000010327
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000010328
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000010329
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000010330
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000010331
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010332
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000010333Single cup vacuum gripper, single stage ejector, supply line pressure sensor, vented before set-down
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000010336
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000010339
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000010341
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,
- OT-2026-000010342
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000010343
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000010344
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000010345
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is v
- OT-2026-000010346
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000010348
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000010351
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000010352
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000010355
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent
- OT-2026-000010356
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000010357
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the va
- OT-2026-000010359
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by th
- OT-2026-000010363
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrangement is
- OT-2026-000010365
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrangem
- OT-2026-000010367
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000010370
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent va
- OT-2026-000010372
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000010373
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000010374
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the bl
- OT-2026-000010378
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000010384
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off b
- OT-2026-000010388
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down po
- OT-2026-000010389
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000010390
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000010391
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The
- OT-2026-000010392
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000010396
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000010399
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000010402
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010404
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000010405
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circu
- OT-2026-000010406Six cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, vented after set-down
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circ
- OT-2026-000010407
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum ci
- OT-2026-000010408
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented
- OT-2026-000010409
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000010411
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000010412
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the