Vacuum Generation
Vacuum Generation within Fluid Power.
Category CAT-000000232
Publications
- OT-2026-000005923
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed
- OT-2026-000005920
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered suction cup is
- OT-2026-000005919
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth c
- OT-2026-000005918
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a blow-off valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while
- OT-2026-000005917
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a ven
- OT-2026-000005915
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece family
- OT-2026-000005914
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated too
- OT-2026-000005913
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered suction cup is an open
- OT-2026-000005912
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where rel
- OT-2026-000005910
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before th
- OT-2026-000005906
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smo
- OT-2026-000005905
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses changing the tool between jobs without rewiring th
- OT-2026-000005904
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a r
- OT-2026-000005903
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring th
- OT-2026-000005900
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses starting the vacuum at the right moment in the a
- OT-2026-000005899
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses knowing that the workpiece is actually held before the
- OT-2026-000005896
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a
- OT-2026-000005893
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a pressure sensor (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air contin
- OT-2026-000005892
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cu
- OT-2026-000005891
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejector spends com
- OT-2026-000005889
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, wher
- OT-2026-000005888
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece f
- OT-2026-000005886
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses changing the tool between jobs without rewiring the
- OT-2026-000005885
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a contact detector (16), a vent valve (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating bef
- OT-2026-000005884
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses handling workpieces that do not cover the wh
- OT-2026-000005883
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where r
- OT-2026-000005882
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a
- OT-2026-000005879Vacuum cup gripper, two outlet manifold, pump fed, pressure verified at each zone, polyurethane cups
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a pressure sensor (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a
- OT-2026-000005878
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported dro
- OT-2026-000005877
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported dro
- OT-2026-000005876
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before t
- OT-2026-000005875
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered suction cup is an
- OT-2026-000005873
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a blow-off valve (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece family means a rob
- OT-2026-000005872
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a pressure sensor (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicate
- OT-2026-000005871
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18), and a vent valve (20). The arrangement addresses starting the vacuum at the right moment in the ap
- OT-2026-000005869
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a vent valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejector spends
- OT-2026-000005868
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated
- OT-2026-000005866
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuat
- OT-2026-000005864Bellows cup vacuum gripper, per zone isolation, three stage ejector, contact triggered, plastic cups
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup t
- OT-2026-000005860
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a
- OT-2026-000005859
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000005858
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses changing the tool between jobs without rewiring
- OT-2026-000005857
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece
- OT-2026-000005854
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring the
- OT-2026-000005852
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiec
- OT-2026-000005851
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, w
- OT-2026-000005850
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same height, where a r
- OT-2026-000005848Vacuum cup gripper, three zone face, two outlet manifold, pump fed, pressure verified, silicone cups
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses knowing that the workpiece is actually held before
- OT-2026-000005847
An end effector for mechanical gripping end effectors for robotic handling is described. The tool comprises a mounting flange (10), a gripper finger (12), a ejector (14), a separating element (16). The arrangement addresses separating a workpiece that stays on the face after the grip is released, where a thin or slight
- OT-2026-000005846
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a pressure sensor (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compresse