Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000046467
  Foam pad vacuum gripper, two zone face, per zone isolation, two stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,414 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000046469
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,028 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000046470
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,059 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached t

• OT-2026-000046471
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,306 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000046473
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,134 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000046474
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has rea

• OT-2026-000046475
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,411 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000046477
  Three cup vacuum gripper, three outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000046478
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,130 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has rea

• OT-2026-000046479
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,377 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000046481
  Three cup vacuum gripper, three outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,013 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec

• OT-2026-000046482
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,044 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached t

• OT-2026-000046483
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,306 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000046484
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 994 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece

• OT-2026-000046485
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,013 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece

• OT-2026-000046487
  Foam pad vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,448 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reac

• OT-2026-000046488
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046489
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,119 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046491
  Foam pad vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,414 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reac

• OT-2026-000046492
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,065 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046493
  Four cup vacuum gripper, four outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,084 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046495
  Foam pad vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,328 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches th

• OT-2026-000046496
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 994 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece

• OT-2026-000046497
  Four cup vacuum gripper, four outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,011 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow

• OT-2026-000046499
  Foam pad vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,433 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reac

• OT-2026-000046500
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046501
  Four cup vacuum gripper, four outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,117 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000046503
  Foam pad vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,399 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reac

• OT-2026-000046504
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,065 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046505
  Four cup vacuum gripper, four outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,082 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000046506
  Foam pad vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,157 words

  A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000046507
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,291 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000046508
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 994 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece

• OT-2026-000046509
  Four cup vacuum gripper, four outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,011 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow

• OT-2026-000046510
  Foam pad vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position

• OT-2026-000046511
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,396 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000046512
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046513
  Four cup vacuum gripper, four outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,117 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000046514
  Foam pad vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,228 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position

• OT-2026-000046515
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,362 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000046516
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,065 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046517
  Four cup vacuum gripper, four outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,082 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000046518
  Foam pad vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,142 words

  A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000046519
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,291 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000046520
  Single bellows cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 994 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece

• OT-2026-000046521
  Six cup vacuum gripper, six outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,028 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio

• OT-2026-000046522
  Foam pad vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,213 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position

• OT-2026-000046523
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,396 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, two pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000046524
  Single bellows cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046525
  Six cup vacuum gripper, six outlet manifold, single stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,134 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p