Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000046069
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000046070
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,095 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046071
  Foam pad vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,221 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos

• OT-2026-000046072
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,069 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046073
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,204 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046074
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,200 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000046075
  Foam pad vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,186 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos

• OT-2026-000046076
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,035 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046077
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046078
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,166 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000046079
  Foam pad vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,100 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position,

• OT-2026-000046080
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 964 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece

• OT-2026-000046081
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000046082
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,110 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046083
  Foam pad vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,206 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos

• OT-2026-000046084
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,069 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046085
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,204 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046086
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,215 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000046087
  Foam pad vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,171 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos

• OT-2026-000046088
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,035 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046089
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046090
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,181 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000046091
  Four cup vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,063 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do

• OT-2026-000046092
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 964 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece

• OT-2026-000046093
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000046094
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,095 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000046095
  Four cup vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000046096
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,069 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046097
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,204 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046098
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,200 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000046099
  Four cup vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,134 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000046100
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,035 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000046101
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046102
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,166 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000046103
  Four cup vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,063 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do

• OT-2026-000046104
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 997 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow

• OT-2026-000046105
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,099 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000046106
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,059 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached

• OT-2026-000046107
  Four cup vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000046108
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,102 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000046109
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000046110
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has r

• OT-2026-000046111
  Four cup vacuum gripper, four zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,134 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four zone branches, four pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000046112
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,068 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000046113
  Single cup vacuum gripper, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,050 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workp

• OT-2026-000046114
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,130 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has r

• OT-2026-000046115
  Four bellows cup vacuum gripper, four zone face, pump fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,074 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000046116
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 997 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow

• OT-2026-000046117
  Single cup vacuum gripper, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,155 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the

• OT-2026-000046118
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,044 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached