Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000045754
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,067 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o

• OT-2026-000045755
  Three cup vacuum gripper, three zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, three zone branches, three pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000045756
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,086 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000045757
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,138 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000045758
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,032 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o

• OT-2026-000045759
  Three cup vacuum gripper, three zone face, plant vacuum fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,134 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, three zone branches, three pressure sensors and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000045760
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,015 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio

• OT-2026-000045761
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,104 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000045762
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 946 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by

• OT-2026-000045763
  Three bellows cup vacuum gripper, three zone face, pump fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,074 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three zone branches, three pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work

• OT-2026-000045764
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,086 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000045765
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,052 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio

• OT-2026-000045766
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,052 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o

• OT-2026-000045767
  Three bellows cup vacuum gripper, three zone face, pump fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,180 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three zone branches, three pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, th

• OT-2026-000045768
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,015 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positio

• OT-2026-000045769
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,157 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000045770
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,017 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o

• OT-2026-000045771
  Three bellows cup vacuum gripper, three zone face, pump fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three zone branches, three pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, th

• OT-2026-000045772
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,120 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000045773
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,123 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000045774
  Four pad foam vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 961 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by

• OT-2026-000045775
  Three bellows cup vacuum gripper, three zone face, pump fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,074 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three zone branches, three pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work

• OT-2026-000045776
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,086 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down p

• OT-2026-000045777
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,052 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positio

• OT-2026-000045778
  Four pad foam vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,067 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o

• OT-2026-000045779
  Three bellows cup vacuum gripper, three zone face, pump fed, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,180 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three zone branches, three pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, th

• OT-2026-000045780
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,068 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the se

• OT-2026-000045781
  Four cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,001 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece

• OT-2026-000045782
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,049 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is

• OT-2026-000045783
  Four bellows cup vacuum gripper, four zone face, single stage ejector, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,092 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl

• OT-2026-000045784
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,015 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000045785
  Four cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,106 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the work

• OT-2026-000045786
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,014 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is

• OT-2026-000045787
  Four bellows cup vacuum gripper, four zone face, single stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,198 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000045788
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,120 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000045789
  Four cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,072 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the work

• OT-2026-000045790
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 928 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown

• OT-2026-000045791
  Four bellows cup vacuum gripper, four zone face, single stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,163 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000045792
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,086 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000045793
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,033 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down

• OT-2026-000045794
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,034 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is

• OT-2026-000045795
  Four bellows cup vacuum gripper, four zone face, single stage ejector, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,092 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl

• OT-2026-000045796
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,015 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000045797
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,138 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the se

• OT-2026-000045798
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 999 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is

• OT-2026-000045799
  Four bellows cup vacuum gripper, four zone face, single stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,198 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000045800
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,120 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000045801
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,104 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the se

• OT-2026-000045802
  Six pad foam vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 961 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by t

• OT-2026-000045803
  Four bellows cup vacuum gripper, four zone face, single stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,163 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece