Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000044106
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000044107
  Two cup vacuum gripper, two zone face, six outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,142 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000044108
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000044109
  Two cup vacuum gripper, two outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece

• OT-2026-000044110
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,062 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000044111
  Two cup vacuum gripper, two zone face, six outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,071 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, t

• OT-2026-000044112
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,019 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000044113
  Two cup vacuum gripper, two outlet manifold, three stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 983 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece

• OT-2026-000044114
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,167 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000044115
  Two cup vacuum gripper, two zone face, six outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,177 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000044116
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000044117
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 897 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-do

• OT-2026-000044118
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000044119
  Two cup vacuum gripper, two zone face, six outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,142 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000044120
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000044121
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,003 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000044122
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,047 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000044123
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000044124
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,019 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000044125
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 968 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000044126
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,152 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000044127
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000044128
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000044129
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 897 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-do

• OT-2026-000044130
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000044131
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,172 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000044132
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,090 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000044133
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,003 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000044134
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,011 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached

• OT-2026-000044135
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000044136
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 968 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiec

• OT-2026-000044137
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 968 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000044138
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,116 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has r

• OT-2026-000044139
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000044140
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wo

• OT-2026-000044141
  Two cup vacuum gripper, two outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 895 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie

• OT-2026-000044142
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,082 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has r

• OT-2026-000044143
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,172 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000044144
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,039 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wo

• OT-2026-000044145
  Two cup vacuum gripper, two outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,001 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000044146
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 996 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached

• OT-2026-000044147
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000044148
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 968 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiec

• OT-2026-000044149
  Two cup vacuum gripper, two outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 966 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w

• OT-2026-000044150
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,101 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has r

• OT-2026-000044151
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000044152
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wo

• OT-2026-000044153
  Two cup vacuum gripper, two outlet manifold, pump fed, supply line pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 895 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie

• OT-2026-000044154
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,067 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has r

• OT-2026-000044155
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,172 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,