Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000042474
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000042475
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000042476
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042477
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the
- OT-2026-000042478
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000042479
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000042480
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000042481
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the
- OT-2026-000042482
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000042483
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp
- OT-2026-000042484
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042485
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-do
- OT-2026-000042486
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000042487
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000042488
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042489
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the
- OT-2026-000042490
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000042491
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the
- OT-2026-000042492
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000042493
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the
- OT-2026-000042494
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000042495
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000042496
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042497
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000042498
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown
- OT-2026-000042499
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000042500
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042501
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000042502
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positio
- OT-2026-000042503
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000042504
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000042505
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000042506
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down p
- OT-2026-000042507
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000042508
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042509
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000042510
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down p
- OT-2026-000042511
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000042512
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042513
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000042514
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positio
- OT-2026-000042515
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000042516
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000042517
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000042518
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down p
- OT-2026-000042519
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workp
- OT-2026-000042520
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000042521
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down positi
- OT-2026-000042522
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down p
- OT-2026-000042523
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the