Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000036328
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,243 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re

• OT-2026-000036329
  Single cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036330
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp

• OT-2026-000036331
  Foam pad vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000036332
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,348 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi

• OT-2026-000036333
  Single cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036334
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,214 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036335
  Foam pad vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,312 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wor

• OT-2026-000036336
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,314 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi

• OT-2026-000036337
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000036338
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,180 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036339
  Foam pad vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,278 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the wor

• OT-2026-000036340
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,243 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece re

• OT-2026-000036341
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036342
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp

• OT-2026-000036343
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000036344
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,348 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi

• OT-2026-000036345
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036346
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,199 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036347
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,275 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000036348
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,314 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi

• OT-2026-000036349
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000036350
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp

• OT-2026-000036351
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000036352
  Two bellows cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,103 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000036353
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036354
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,214 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036355
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000036356
  Two bellows cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,209 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000036357
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036358
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,180 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036359
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,275 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000036360
  Two bellows cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,174 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000036361
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,098 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000036362
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workp

• OT-2026-000036363
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000036364
  Two bellows cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,103 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000036365
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,203 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036366
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,199 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036367
  Two bellows cup vacuum gripper, two zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000036368
  Two bellows cup vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,209 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000036369
  Single cup vacuum gripper, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-d

• OT-2026-000036370
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,165 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000036371
  Two bellows cup vacuum gripper, two zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,238 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workp

• OT-2026-000036372
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,332 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000036373
  Six cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,137 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set

• OT-2026-000036374
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, pump fed, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,146 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down positi

• OT-2026-000036375
  Two cup vacuum gripper, two zone face, common isolation valve, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positi

• OT-2026-000036376
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,261 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000036377
  Six cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,103 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set