Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000033883
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000033884
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set
- OT-2026-000033885
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000033886
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece i
- OT-2026-000033887
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000033888
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set
- OT-2026-000033889
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000033890
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece i
- OT-2026-000033891
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000033892
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000033893
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000033894
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000033895
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000033896
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000033897
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000033898
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000033899
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b
- OT-2026-000033900
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000033901
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000033902
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000033903
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000033904
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000033905
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000033906
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000033907
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000033908
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000033909
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the wo
- OT-2026-000033910
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000033911
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000033912
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000033913
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000033914
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000033915
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000033916
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000033917
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the wo
- OT-2026-000033918
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000033919
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000033920
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000033921
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the wo
- OT-2026-000033922
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown o
- OT-2026-000033923
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000033924
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000033925
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-do
- OT-2026-000033926
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000033927
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p
- OT-2026-000033277
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec
- OT-2026-000033278
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000033279
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000033280
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000033281
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiec