Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000033012
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000033014
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,152 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos

• OT-2026-000033015
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,160 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000033016
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,250 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033018
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,118 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos

• OT-2026-000033019
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,094 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000033020
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,216 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033022
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,032 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position,

• OT-2026-000033023
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,200 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000033024
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000033026
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,137 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos

• OT-2026-000033027
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,165 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000033028
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,250 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033030
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,103 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down pos

• OT-2026-000033031
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,079 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000033032
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,216 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033034
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,065 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000033035
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,185 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000033036
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000033038
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033039
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,150 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000033040
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,250 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033042
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033043
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000033044
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000033046
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,050 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000033047
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,148 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000033048
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,250 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033050
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,155 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033051
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,113 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000033052
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,216 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033054
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,121 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033055
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000033056
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000033058
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,065 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000033059
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,148 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000033060
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,250 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033062
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033063
  Three cup vacuum gripper, three zone face, six outlet manifold, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,113 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000033064
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,216 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033066
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033067
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, plant vacuum fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,037 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece rea

• OT-2026-000033068
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,145 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000033070
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,050 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000033071
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,143 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie

• OT-2026-000033072
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,250 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033074
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,121 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, th

• OT-2026-000033075
  Three bellows cup vacuum gripper, three zone face, six outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,108 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie

• OT-2026-000033076
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,216 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit

• OT-2026-000033078
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,065 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the work