Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000027961
  Six cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,354 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027962
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,378 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027963
  Foam pad vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,342 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000027964
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 971 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000027965
  Six cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027966
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,292 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000027967
  Foam pad vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,308 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000027968
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000027969
  Six cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,249 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000027970
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027971
  Foam pad vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,222 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000027972
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000027973
  Six cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,354 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027974
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,363 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027975
  Foam pad vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,327 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000027976
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 971 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000027977
  Six cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027978
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,307 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000027979
  Foam pad vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,293 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the w

• OT-2026-000027980
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000027981
  Six cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,249 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000027982
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,412 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027983
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,185 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000027984
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000027985
  Six cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,354 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027986
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,378 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027987
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,290 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000027988
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 971 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000027989
  Six cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027990
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,292 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000027991
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,256 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000027992
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000027993
  Six cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,249 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches th

• OT-2026-000027994
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027995
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,185 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000027996
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000027997
  Six cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,354 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000027998
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,363 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000027999
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,290 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000028000
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 920 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000028001
  Six cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,320 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000028002
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,258 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before th

• OT-2026-000028003
  Two cup vacuum gripper, two zone face, per zone isolation, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,256 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000028004
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,025 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se

• OT-2026-000028005
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,200 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection.

• OT-2026-000028006
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,363 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Bef

• OT-2026-000028007
  Two bellows cup vacuum gripper, two zone face, per zone isolation, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000028008
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 991 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se

• OT-2026-000028009
  Six cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,305 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conne

• OT-2026-000028010
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,329 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Bef