Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000028161
  Two cup vacuum gripper, two outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,179 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028162
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,379 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches

• OT-2026-000028163
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,170 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece

• OT-2026-000028164
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000028165
  Two cup vacuum gripper, two outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,144 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028166
  Four pad foam vacuum gripper, four outlet manifold, common isolation valve, pump fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,345 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches

• OT-2026-000028167
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,275 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000028168
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 971 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000028169
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,091 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000028170
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,307 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000028171
  Two cup vacuum gripper, two zone face, per zone isolation, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,241 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor

• OT-2026-000028172
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,076 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000028173
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028174
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,412 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000028175
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,181 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000028176
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,042 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000028177
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,162 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028178
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,378 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000028179
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028180
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 920 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000028181
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,091 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000028182
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,292 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000028183
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,181 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000028184
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,025 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000028185
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028186
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000028187
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,286 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028188
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 991 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000028189
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,162 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028190
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,363 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000028191
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028192
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 920 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000028193
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,091 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000028194
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,307 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000028195
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,181 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000028196
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,025 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000028197
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028198
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,412 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000028199
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,286 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028200
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 991 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000028201
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,162 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028202
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,378 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000028203
  Two bellows cup vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,252 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d

• OT-2026-000028204
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 920 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000028205
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,091 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000028206
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,292 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000028207
  Foam pad vacuum gripper, two zone face, per zone isolation, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,221 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, two isolation valves, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the

• OT-2026-000028208
  Six bellows cup vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,025 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000028209
  Three cup vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000028210
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,397 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-