Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000026876
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000026878
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000026879
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000026880
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000026882
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000026883
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000026884
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the w
- OT-2026-000026886
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000026887
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000026888
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the w
- OT-2026-000026890
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000026891
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000026892
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the w
- OT-2026-000026894
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000026895
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000026896
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the w
- OT-2026-000026898
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000026899
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000026900
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000026902
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000026903
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000026904
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the w
- OT-2026-000026906
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000026907
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000026908
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the w
- OT-2026-000026910
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000026911Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000026912
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000026914
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000026915Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000026916
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000026918
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000026919
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000026920
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000026922
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000026923Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000026924
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000026926
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000026927Foam pad vacuum gripper, two zone face, pump fed, pulsed blow-off before set-down, on a tool changer
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000026928
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000026929
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down
- OT-2026-000026930
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000026931
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000026932
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the b
- OT-2026-000026933
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down
- OT-2026-000026934
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000026935
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work
- OT-2026-000026936
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000026937
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000026938
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor