Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000026160
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,352 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026161
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 957 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000026162
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,033 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000026163
  Three cup vacuum gripper, three zone face, six outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000026164
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,318 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026165
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,063 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000026166
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,139 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026167
  Three cup vacuum gripper, three zone face, six outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,100 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000026168
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000026169
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,028 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000026170
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,104 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026171
  Three cup vacuum gripper, three zone face, six outlet manifold, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,029 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi

• OT-2026-000026172
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,352 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026173
  Four cup vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 975 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000026174
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000026175
  Three cup vacuum gripper, three zone face, six outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,135 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000026176
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,318 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026177
  Four cup vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000026178
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026179
  Three cup vacuum gripper, three zone face, six outlet manifold, pump fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,100 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000026180
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000026181
  Four cup vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 975 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000026182
  Two pad foam vacuum gripper, two outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026183
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,058 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000026184
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,352 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026185
  Four cup vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000026186
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,033 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000026187
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000026188
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,318 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026189
  Four cup vacuum gripper, four outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000026190
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,139 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026191
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000026192
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000026193
  Four cup vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 975 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000026194
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,104 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026195
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,058 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000026196
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,352 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026197
  Four cup vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000026198
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000026199
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,164 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000026200
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,318 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026201
  Four cup vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000026202
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,124 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026203
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,129 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000026204
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,247 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches t

• OT-2026-000026205
  Four cup vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 975 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000026206
  Two pad foam vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,089 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000026207
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,058 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo

• OT-2026-000026208
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,352 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000026209
  Four cup vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i