Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000022197
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000022198
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022199
  Three bellows cup vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,200 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000022200
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,156 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000022201
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,012 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000022202
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,017 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000022203
  Foam pad vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000022204
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,085 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie

• OT-2026-000022205
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 941 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000022206
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,122 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022207
  Foam pad vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,274 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000022208
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,191 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000022209
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,046 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000022210
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,088 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022211
  Foam pad vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,240 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000022212
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,156 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000022213
  Three cup vacuum gripper, three outlet manifold, common isolation valve, pump fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,012 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000022214
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,002 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000022215
  Foam pad vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,154 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi

• OT-2026-000022216
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,085 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpie

• OT-2026-000022217
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 959 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000022218
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,107 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022219
  Foam pad vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,259 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000022220
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,191 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000022221
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,064 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000022222
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022223
  Foam pad vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,225 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000022224
  Three bellows cup vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,156 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the w

• OT-2026-000022225
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,030 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000022226
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,017 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000022227
  Three cup vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,117 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000022228
  Three bellows cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,084 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000022229
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 959 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000022230
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,122 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022231
  Three cup vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,222 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000022232
  Three bellows cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,190 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set

• OT-2026-000022233
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,064 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000022234
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,088 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022235
  Three cup vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,188 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000022236
  Three bellows cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,155 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set

• OT-2026-000022237
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,030 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000022238
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,002 words

  A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000022239
  Three cup vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,117 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000022240
  Three bellows cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,084 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000022241
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 959 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000022242
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,107 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000022243
  Three cup vacuum gripper, three zone face, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,222 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down p

• OT-2026-000022244
  Three bellows cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,190 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set

• OT-2026-000022245
  Four cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,064 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i

• OT-2026-000022246
  Two pad foam vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,073 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one isolation valve, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b