Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000021888
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac
- OT-2026-000021889
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000021890
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000021891
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000021892
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac
- OT-2026-000021893
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000021894
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021895
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000021896
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches th
- OT-2026-000021897
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000021898
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021899
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000021900
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac
- OT-2026-000021901
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000021902
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000021903
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000021904
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac
- OT-2026-000021905
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000021906
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000021907
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000021908
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000021909
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000021910
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000021911
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the work
- OT-2026-000021912
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000021913
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000021914
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000021915
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000021916
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000021917
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000021918
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000021919
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021920
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000021921Six cup vacuum gripper, six outlet manifold, three stage ejector, sustained blow-off before set-down
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000021922
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000021923
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021924
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000021925
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000021926
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000021927
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000021928
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000021929
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000021930
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000021931
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021932
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000021933Six cup vacuum gripper, six outlet manifold, three stage ejector, sustained blow-off before set-down
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000021934
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off va
- OT-2026-000021935
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one isolation valve, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000021936
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000021937
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo