Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000018175
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000018176
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018177
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches t
- OT-2026-000018178
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Bef
- OT-2026-000018179
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000018180
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018181
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece rea
- OT-2026-000018182
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Bef
- OT-2026-000018183
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000018184
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000018185
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece rea
- OT-2026-000018186
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000018187
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000018188
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018189
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches t
- OT-2026-000018190
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reache
- OT-2026-000018191
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000018192
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018193
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece rea
- OT-2026-000018194
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reache
- OT-2026-000018195
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000018196
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000018197
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece rea
- OT-2026-000018198
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000018199
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000018200
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018201
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection
- OT-2026-000018202
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reache
- OT-2026-000018203
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000018204
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018205
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conn
- OT-2026-000018206
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reache
- OT-2026-000018207
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000018208
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000018209
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conn
- OT-2026-000018210
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down
- OT-2026-000018211
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000018212
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018213
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection
- OT-2026-000018214
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set
- OT-2026-000018215
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000018216
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000018217
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conn
- OT-2026-000018218
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set
- OT-2026-000018219
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000018220
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000018221
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum conn
- OT-2026-000018222
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down
- OT-2026-000018223
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000018224
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos