Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000017825
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000017826
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reac
- OT-2026-000017827
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000017828
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017829
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000017830
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000017831
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000017832
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017833
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000017834
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000017835
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000017836
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000017837
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000017838
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000017839
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017840
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017841
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece
- OT-2026-000017842
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000017843
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017844
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017845
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor
- OT-2026-000017846
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000017847
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000017848
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000017849
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor
- OT-2026-000017850
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000017851
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017852
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017853
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece
- OT-2026-000017854
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000017855
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017856
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017857
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor
- OT-2026-000017858
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000017859
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000017860
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000017861
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the wor
- OT-2026-000017862
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000017863
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017864
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017865
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000017866
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000017867
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o
- OT-2026-000017868
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000017869
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000017870
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000017871
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000017872
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000017873
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000017874
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo