Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000016634
  Four pad foam vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,106 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posit

• OT-2026-000016635
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,033 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the b

• OT-2026-000016636
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016637
  Six cup vacuum gripper, six outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 974 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000016638
  Four pad foam vacuum gripper, four outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,071 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posit

• OT-2026-000016639
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 925 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by

• OT-2026-000016640
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016641
  Six cup vacuum gripper, six outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,080 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016642
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,014 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown of

• OT-2026-000016643
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,031 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016644
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016645
  Six cup vacuum gripper, six outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016646
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,120 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl

• OT-2026-000016647
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 996 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016648
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016649
  Six cup vacuum gripper, six outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 974 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000016650
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,085 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl

• OT-2026-000016651
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 925 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by

• OT-2026-000016652
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016653
  Six cup vacuum gripper, six outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,080 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016654
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 999 words

  A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown of

• OT-2026-000016655
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,031 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016656
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016657
  Six cup vacuum gripper, six outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016658
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,105 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl

• OT-2026-000016659
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 996 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016660
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016661
  Six cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 957 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000016662
  Four pad foam vacuum gripper, four outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,070 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl

• OT-2026-000016663
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 937 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by

• OT-2026-000016664
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016665
  Six cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,063 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000016666
  Six pad foam vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,032 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000016667
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,043 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016668
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016669
  Six cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,028 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000016670
  Six pad foam vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,138 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000016671
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,008 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016672
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016673
  Six cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 957 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down

• OT-2026-000016674
  Six pad foam vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,103 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000016675
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 937 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by

• OT-2026-000016676
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016677
  Six cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,063 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000016678
  Six pad foam vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,017 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000016679
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,043 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o

• OT-2026-000016680
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000016681
  Six cup vacuum gripper, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,028 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000016682
  Six pad foam vacuum gripper, six outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,123 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off b

• OT-2026-000016683
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,008 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown o