Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000016177
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016178
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000016179
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000016180
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000016181
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t
- OT-2026-000016182
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000016183
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000016184
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000016185
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016186
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000016187
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000016188
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016189
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posit
- OT-2026-000016190
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000016191
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000016192
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016193
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece
- OT-2026-000016194
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000016195
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo
- OT-2026-000016196
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000016197
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the work
- OT-2026-000016198
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000016199
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-
- OT-2026-000016200
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016201
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the work
- OT-2026-000016202
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016203
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000016204
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016205
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece
- OT-2026-000016206
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016207
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000016208
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000016209
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the work
- OT-2026-000016210
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000016211
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-
- OT-2026-000016212
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016213
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the work
- OT-2026-000016214
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016215
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000016216
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016217
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000016218
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor
- OT-2026-000016219
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000016220
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000016221
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000016222
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000016223
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000016224
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000016225
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-do
- OT-2026-000016226
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wor