Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000016327
  Foam pad vacuum gripper, three zone face, three outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,020 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, t

• OT-2026-000016328
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000016329
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,062 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000016330
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,032 words

  A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by th

• OT-2026-000016331
  Foam pad vacuum gripper, three zone face, three outlet manifold, plant vacuum fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 934 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the wor

• OT-2026-000016332
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position

• OT-2026-000016333
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 956 words

  A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiec

• OT-2026-000016334
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,138 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off

• OT-2026-000016335
  Foam pad vacuum gripper, three zone face, three outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,040 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, t

• OT-2026-000016336
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000016337
  Three cup vacuum gripper, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,062 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wo

• OT-2026-000016338
  Three pad foam vacuum gripper, three outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,103 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off

• OT-2026-000016339
  Foam pad vacuum gripper, three zone face, three outlet manifold, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,005 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, t

• OT-2026-000016340
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000016341
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 974 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000016342
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,212 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reache

• OT-2026-000016343
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 997 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000016344
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016345
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,080 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016346
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000016347
  Foam pad vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,072 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000016348
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000016349
  Two cup vacuum gripper, two outlet manifold, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016350
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,231 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reache

• OT-2026-000016351
  Foam pad vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,037 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000016352
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000016353
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 974 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000016354
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reache

• OT-2026-000016355
  Foam pad vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 951 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-

• OT-2026-000016356
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016357
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,080 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016358
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,172 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w

• OT-2026-000016359
  Foam pad vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,057 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000016360
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000016361
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016362
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,277 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,

• OT-2026-000016363
  Foam pad vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,022 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the

• OT-2026-000016364
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000016365
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 974 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown

• OT-2026-000016366
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,243 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,

• OT-2026-000016367
  Three cup vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 914 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off

• OT-2026-000016368
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,087 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000016369
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,080 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016370
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,157 words

  A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w

• OT-2026-000016371
  Three cup vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,020 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000016372
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,192 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi

• OT-2026-000016373
  Two cup vacuum gripper, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,045 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is

• OT-2026-000016374
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, pump fed, supply line pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position,

• OT-2026-000016375
  Three cup vacuum gripper, three zone face, three outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 985 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blo

• OT-2026-000016376
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,158 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi