Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000015627
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workp
- OT-2026-000015628
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down
- OT-2026-000015629
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000015630
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015631
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the
- OT-2026-000015632
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000015633
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000015634
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000015635
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the
- OT-2026-000015636
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000015637
A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000015638
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015639
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position
- OT-2026-000015640
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down
- OT-2026-000015641
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000015642
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015643
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down po
- OT-2026-000015644
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000015645
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015646
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000015647
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down po
- OT-2026-000015648
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000015649
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015650
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015651
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position
- OT-2026-000015652
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000015653
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000015654
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015655
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down po
- OT-2026-000015656
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000015657
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015658
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000015659
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down po
- OT-2026-000015660
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000015661
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015662
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015663
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000015664
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000015665
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000015666
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000015667
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015668
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000015669
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015670
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, t
- OT-2026-000015671
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015672
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000015673
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000015674
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one plant vacuum connection, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posit
- OT-2026-000015675
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000015676
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece