Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000014322
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000014323
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p
- OT-2026-000014324
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014325
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000014326
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000014327
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-
- OT-2026-000014328
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014329
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000014330
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by t
- OT-2026-000014331
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-
- OT-2026-000014332
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014333
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do
- OT-2026-000014334
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014335
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p
- OT-2026-000014336
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014337
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000014338
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by t
- OT-2026-000014339
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-
- OT-2026-000014340
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014341
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000014342
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014343
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-
- OT-2026-000014344
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014345
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do
- OT-2026-000014346
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014347
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down p
- OT-2026-000014348
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014349
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000014350
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by t
- OT-2026-000014351
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-
- OT-2026-000014352
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014353
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000014354
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014355
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-
- OT-2026-000014356
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014357
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014358
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014359
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, th
- OT-2026-000014360
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014361
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000014362
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by t
- OT-2026-000014363
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi
- OT-2026-000014364
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece i
- OT-2026-000014365
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the w
- OT-2026-000014366
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014367
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down positi
- OT-2026-000014368
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000014369
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000014370
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown of
- OT-2026-000014371
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one isolation valve, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, th