Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000013922
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000013923
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do
- OT-2026-000013924
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013925
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000013926
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000013927
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013928
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000013929
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000013930
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000013931
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013932
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000013933
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po
- OT-2026-000013934
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000013935
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do
- OT-2026-000013936
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013937
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000013938
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000013939
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013940
A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000013941
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000013942
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000013943
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013944
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000013946
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000013947
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position,
- OT-2026-000013948
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013950
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013951
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos
- OT-2026-000013952
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013954
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000013955
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos
- OT-2026-000013956
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000013958
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000013959
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position,
- OT-2026-000013960
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013962
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013963
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos
- OT-2026-000013964
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013966
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000013967
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down pos
- OT-2026-000013968
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl
- OT-2026-000013970
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reach
- OT-2026-000013971
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-do
- OT-2026-000013972
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013974
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000013975
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013976
A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013978
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position
- OT-2026-000013979
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, four isolation valves, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the
- OT-2026-000013980
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is bl