Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000013426Six pad foam vacuum gripper, six outlet manifold, two stage ejector, pulsed blow-off before set-down
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000013427
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000013429
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000013430
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013431
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000013433
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000013434
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013435
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000013437
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down
- OT-2026-000013438Six pad foam vacuum gripper, six outlet manifold, two stage ejector, pulsed blow-off before set-down
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000013439
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000013441
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000013442
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013443
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000013445
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000013446
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013447
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000013449
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013450
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000013451
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000013453
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000013454
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013455
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000013457
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000013458
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013459
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000013461
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece
- OT-2026-000013462
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000013463
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000013465
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the wor
- OT-2026-000013466
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013467
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000013469
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000013470
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000013471
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000013473
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000013474
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, t
- OT-2026-000013475
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000013477
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000013478
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posit
- OT-2026-000013479
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000013481
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000013482
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posit
- OT-2026-000013483
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi
- OT-2026-000013485
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000013486
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, t
- OT-2026-000013487
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is
- OT-2026-000013489
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000013490
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one plant vacuum connection, one manifold, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down posit
- OT-2026-000013491
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpi