Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000010711
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010712
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum cir
- OT-2026-000010715
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010716
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000010717
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, three isolation valves, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-dow
- OT-2026-000010718
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circu
- OT-2026-000010719
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down
- OT-2026-000010720
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow
- OT-2026-000010721
A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circu
- OT-2026-000010722
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000010723
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off
- OT-2026-000010724
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000010725
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000010726
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blow
- OT-2026-000010727
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one plant vacuum connection, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, t
- OT-2026-000010728
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posi
- OT-2026-000010729
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010731
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000010732
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000010733
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the wor
- OT-2026-000010737
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the vacuum
- OT-2026-000010738
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, four zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the v
- OT-2026-000010739
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000010740
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum cir
- OT-2026-000010741
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the
- OT-2026-000010742
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off va
- OT-2026-000010745
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set
- OT-2026-000010746
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i
- OT-2026-000010747
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circ
- OT-2026-000010749
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the vacuum c
- OT-2026-000010751
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum cir
- OT-2026-000010752
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is ve
- OT-2026-000010753
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one isolation valve, one pressure sensor and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit
- OT-2026-000010754
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-
- OT-2026-000010755
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the v
- OT-2026-000010756
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, two zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000010757
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circ
- OT-2026-000010758
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off
- OT-2026-000010761
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down positio
- OT-2026-000010762
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000010763
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. Th
- OT-2026-000010764
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-down
- OT-2026-000010765
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position,
- OT-2026-000010766
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two isolation valves, two zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000010768
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit i
- OT-2026-000010769
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold, one pressure sensor and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000010771
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000010772
A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vac
- OT-2026-000010773
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the se
- OT-2026-000010774
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three isolation valves, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the va