Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000009173
  Six cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,111 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one vacuum pump, one manifold, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the work

• OT-2026-000009174
  Three cup vacuum gripper, three outlet manifold, single stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 988 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpi

• OT-2026-000009175
  Foam pad vacuum gripper, two zone face, pump fed, supply line pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,079 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, two zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the v

• OT-2026-000009176
  Foam pad vacuum gripper, four zone face, six outlet manifold, plant vacuum fed, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,136 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set

• OT-2026-000009177
  Foam pad vacuum gripper, four zone face, six outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,235 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000009178
  Single bellows cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,144 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector, one isolation valve, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the work

• OT-2026-000009179
  Three cup vacuum gripper, three zone face, three outlet manifold, pump fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,112 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down

• OT-2026-000009180
  Two cup vacuum gripper, two zone face, two stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 990 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui

• OT-2026-000009181
  Four cup vacuum gripper, four zone face, six outlet manifold, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,032 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, four zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t

• OT-2026-000009182
  Two cup vacuum gripper, two outlet manifold, pump fed, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 940 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuu

• OT-2026-000009183
  Foam pad vacuum gripper, three zone face, three outlet manifold, single stage ejector, pressure sensor per zone, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,165 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, three zone branches, three pressure sensors and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit

• OT-2026-000009185
  Three bellows cup vacuum gripper, three zone face, three outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,244 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece h

• OT-2026-000009186
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,272 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the v

• OT-2026-000009187
  Two bellows cup vacuum gripper, two zone face, single stage ejector, pressure sensor per zone, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches, two pressure sensors, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, t

• OT-2026-000009188
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, plant vacuum fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,006 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has re

• OT-2026-000009190
  Foam pad vacuum gripper, two zone face, three stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,102 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000009191
  Three pad foam vacuum gripper, three outlet manifold, plant vacuum fed, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,096 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reac

• OT-2026-000009192
  Three bellows cup vacuum gripper, three outlet manifold, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 882 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by th

• OT-2026-000009193
  Two cup vacuum gripper, two zone face, three outlet manifold, single stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,217 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-

• OT-2026-000009194
  Six bellows cup vacuum gripper, six outlet manifold, pump fed, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,026 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one manifold, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down positi

• OT-2026-000009195
  Foam pad vacuum gripper, two zone face, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,024 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, two zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented

• OT-2026-000009196
  Foam pad vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,207 words

  A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the

• OT-2026-000009197
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,113 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000009198
  Foam pad vacuum gripper, common isolation valve, pump fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,050 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie

• OT-2026-000009200
  Six cup vacuum gripper, six outlet manifold, common isolation valve, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,083 words

  A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down po

• OT-2026-000009201
  Three cup vacuum gripper, three zone face, six outlet manifold, pump fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 910 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, one manifold, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum ci

• OT-2026-000009202
  Foam pad vacuum gripper, common isolation valve, single stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,013 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v

• OT-2026-000009203
  Foam pad vacuum gripper, three zone face, three outlet manifold, plant vacuum fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,262 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, three zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the

• OT-2026-000009204
  Four bellows cup vacuum gripper, four outlet manifold, single stage ejector, supply line pressure sensor, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,037 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blow

• OT-2026-000009205
  Foam pad vacuum gripper, three zone face, six outlet manifold, plant vacuum fed, pressure sensor per zone, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,218 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, three zone branches, three pressure sensors and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached t

• OT-2026-000009206
  Four cup vacuum gripper, four zone face, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,233 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down pos

• OT-2026-000009207
  Two cup vacuum gripper, two zone face, two outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,214 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posit

• OT-2026-000009208
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, plant vacuum fed, manifold pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,083 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the w

• OT-2026-000009209
  Two cup vacuum gripper, two zone face, two outlet manifold, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,191 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the s

• OT-2026-000009210
  Six cup vacuum gripper, six outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reach

• OT-2026-000009211
  Four bellows cup vacuum gripper, four zone face, per zone isolation, pump fed, supply line pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,393 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, four isolation valves, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the work

• OT-2026-000009212
  Foam pad vacuum gripper, two zone face, two outlet manifold, pump fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,070 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one manifold, two zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the va

• OT-2026-000009213
  Four cup vacuum gripper, four outlet manifold, single stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 818 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is

• OT-2026-000009214
  Foam pad vacuum gripper, four zone face, plant vacuum fed, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,036 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down p

• OT-2026-000009216
  Three cup vacuum gripper, three outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down positio

• OT-2026-000009217
  Foam pad vacuum gripper, two zone face, common isolation valve, two stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,133 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one isolation valve, two zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vac

• OT-2026-000009218
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,187 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, t

• OT-2026-000009219
  Single bellows cup vacuum gripper, common isolation valve, pump fed, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,140 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the s

• OT-2026-000009220
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,304 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down

• OT-2026-000009221
  Three cup vacuum gripper, three zone face, plant vacuum fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 932 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, three zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000009222
  Single cup vacuum gripper, common isolation valve, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 973 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum

• OT-2026-000009223
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, pump fed, manifold pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,122 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one manifold, four zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down

• OT-2026-000009224
  Four pad foam vacuum gripper, four outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 965 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve

• OT-2026-000009225
  Four bellows cup vacuum gripper, four zone face, four outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,143 words

  A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one plant vacuum connection, one manifold, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After

• OT-2026-000009226
  Four cup vacuum gripper, four outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,007 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down pos