Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000008231
  Two cup vacuum gripper, two zone face, three outlet manifold, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,338 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the

• OT-2026-000008232
  Six cup vacuum gripper, six outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,168 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one isolation valve, one manifold, one pressure sensor and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000008233
  Two cup vacuum gripper, two zone face, six outlet manifold, pump fed, pressure sensor per zone, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,303 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one manifold, two zone branches, two pressure sensors, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches

• OT-2026-000008234
  Foam pad vacuum gripper, four zone face, six outlet manifold, three stage ejector, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,177 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workp

• OT-2026-000008235
  Four cup vacuum gripper, four zone face, common isolation valve, pump fed, pressure sensor per zone, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,370 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, one isolation valve, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece

• OT-2026-000008236
  Two bellows cup vacuum gripper, two zone face, three outlet manifold, single stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position,

• OT-2026-000008237
  Four cup vacuum gripper, four zone face, six outlet manifold, three stage ejector, manifold pressure sensor, vented before set-down
  September 17, 2026 · Vacuum Grippers · 1,175 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down

• OT-2026-000008238
  Four cup vacuum gripper, four outlet manifold, two stage ejector, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,009 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpie

• OT-2026-000008239
  Two cup vacuum gripper, two zone face, common isolation valve, three stage ejector, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,151 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one isolation valve, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position,

• OT-2026-000008240
  Two bellows cup vacuum gripper, two zone face, per zone isolation, single stage ejector, supply line pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,327 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, two isolation valves, two zone branches, one pressure sensor, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reach

• OT-2026-000008241
  Three cup vacuum gripper, three zone face, four outlet manifold, single stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,018 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t

• OT-2026-000008242
  Two bellows cup vacuum gripper, two zone face, six outlet manifold, single stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,151 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000008243
  Three cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,205 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000008244
  Two cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000008245
  Four cup vacuum gripper, four outlet manifold, two stage ejector, manifold pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 959 words

  A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position,

• OT-2026-000008246
  Foam pad vacuum gripper, three zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,097 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, one isolation valve, three zone branches, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the

• OT-2026-000008247
  Foam pad vacuum gripper, three zone face, six outlet manifold, three stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,054 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, three zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum c

• OT-2026-000008248
  Two bellows cup vacuum gripper, two zone face, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,249 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one isolation valve, two zone branches, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workp

• OT-2026-000008249
  Single cup vacuum gripper, common isolation valve, two stage ejector, vented before set-down
  September 17, 2026 · Vacuum Grippers · 974 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit i

• OT-2026-000008250
  Two cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,081 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece reach

• OT-2026-000008251
  Three cup vacuum gripper, three outlet manifold, common isolation valve, plant vacuum fed, supply line pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,369 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one plant vacuum connection, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum con

• OT-2026-000008252
  Four cup vacuum gripper, four zone face, six outlet manifold, plant vacuum fed, pressure sensor per zone, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,221 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one plant vacuum connection, one manifold, four zone branches, four pressure sensors and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece re

• OT-2026-000008253
  Two bellows cup vacuum gripper, two outlet manifold, common isolation valve, two stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,362 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reac

• OT-2026-000008254
  Two cup vacuum gripper, two outlet manifold, single stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 704 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val

• OT-2026-000008255
  Two cup vacuum gripper, two outlet manifold, plant vacuum fed, manifold pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,049 words

  A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece

• OT-2026-000008256
  Three bellows cup vacuum gripper, three zone face, per zone isolation, single stage ejector, vented after set-down
  September 17, 2026 · Vacuum Grippers · 1,070 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down posit

• OT-2026-000008257
  Four bellows cup vacuum gripper, four zone face, two stage ejector, pressure sensor per zone, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,224 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, four zone branches, four pressure sensors and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000008258
  Three bellows cup vacuum gripper, three zone face, per zone isolation, plant vacuum fed, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,196 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, three isolation valves, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches t

• OT-2026-000008259
  Foam pad vacuum gripper, four zone face, six outlet manifold, two stage ejector, manifold pressure sensor, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,235 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, four zone branches, one pressure sensor, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000008260
  Three bellows cup vacuum gripper, three zone face, two stage ejector, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 925 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three zone branches, one contact detector and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum ci

• OT-2026-000008261
  Single cup vacuum gripper, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,153 words

  A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down po

• OT-2026-000008262
  Single cup vacuum gripper, common isolation valve, single stage ejector, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,220 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down pos

• OT-2026-000008263
  Foam pad vacuum gripper, four zone face, plant vacuum fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 965 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, four zone branches, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down posit

• OT-2026-000008264
  Three pad foam vacuum gripper, three outlet manifold, common isolation valve, pump fed, manifold pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,290 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches th

• OT-2026-000008265
  Two cup vacuum gripper, two zone face, three outlet manifold, three stage ejector, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,182 words

  A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set

• OT-2026-000008266
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,395 words

  A zoned vacuum gripping tool comprising one tool-change interface, four suction cups, one vacuum pump, four isolation valves, four zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the work

• OT-2026-000008267
  Three bellows cup vacuum gripper, three zone face, common isolation valve, plant vacuum fed, pressure sensor per zone, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,159 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one plant vacuum connection, one isolation valve, three zone branches, three pressure sensors and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the wor

• OT-2026-000008268
  Three bellows cup vacuum gripper, three outlet manifold, common isolation valve, three stage ejector, supply line pressure sensor, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,121 words

  A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down positi

• OT-2026-000008269
  Six pad foam vacuum gripper, six outlet manifold, common isolation valve, pump fed, manifold pressure sensor, sustained blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,221 words

  A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one vacuum pump, one isolation valve, one manifold, one pressure sensor and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down positi

• OT-2026-000008270
  Foam pad vacuum gripper, three zone face, six outlet manifold, pump fed, manifold pressure sensor, sustained blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,077 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one manifold, three zone branches, one pressure sensor and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the wor

• OT-2026-000008271
  Two bellows cup vacuum gripper, two zone face, three outlet manifold, three stage ejector, pulsed blow-off after set-down
  September 17, 2026 · Vacuum Grippers · 1,012 words

  A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the w

• OT-2026-000008272
  Three cup vacuum gripper, three outlet manifold, single stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,187 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down po

• OT-2026-000008273
  Four cup vacuum gripper, four outlet manifold, common isolation valve, single stage ejector, manifold pressure sensor, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,355 words

  A suction-cup vacuum gripping tool comprising one tool-change interface, four suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece rea

• OT-2026-000008274
  Foam pad vacuum gripper, four zone face, common isolation valve, pump fed, supply line pressure sensor, vented before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,273 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, four zone branches, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, th

• OT-2026-000008275
  Four cup vacuum gripper, four zone face, per zone isolation, pump fed, pulsed blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,100 words

  A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one vacuum pump, four isolation valves, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpie

• OT-2026-000008276
  Four bellows cup vacuum gripper, four outlet manifold, common isolation valve, two stage ejector, supply line pressure sensor, pulsed blow-off after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,335 words

  A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has

• OT-2026-000008277
  Four bellows cup vacuum gripper, four zone face, six outlet manifold, two stage ejector, pressure sensor per zone, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,179 words

  A zoned vacuum gripping tool comprising one tool-change interface, four bellows cups, one ejector, one manifold, four zone branches, four pressure sensors and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position,

• OT-2026-000008278
  Two cup vacuum gripper, two zone face, pump fed, vented after set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 956 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, two zone branches, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuu

• OT-2026-000008279
  Two cup vacuum gripper, two zone face, two outlet manifold, three stage ejector, manifold pressure sensor, pulsed blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,197 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the

• OT-2026-000008280
  Two bellows cup vacuum gripper, two zone face, two outlet manifold, pump fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,159 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one vacuum pump, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down posi