Valves and Manifolds
Valves and Manifolds within Fluid Power.
Category CAT-000000230
Publications
- OT-2026-000064498
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000064499
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064501
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064502
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000064503
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000064505
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000064506
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented
- OT-2026-000064507
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064509
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064510
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the
- OT-2026-000064511
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064513
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064514
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positio
- OT-2026-000064515
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000064517
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000064518
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positio
- OT-2026-000064519
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000064521
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064522
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one plant vacuum connection, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down positio
- OT-2026-000064523
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000064525
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064526
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000064527
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position,
- OT-2026-000064529
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000064530
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000064531
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000064533
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064534
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000064535
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down pos
- OT-2026-000064537
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064538
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000064539
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000064541
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, t
- OT-2026-000064542
A foam-pad vacuum gripping tool comprising one tool-change interface, two foam pads, one vacuum pump, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000064543
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064545
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064546
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000064547
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064549
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down posit
- OT-2026-000064550
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000064551
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-d
- OT-2026-000064553
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has
- OT-2026-000064554
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000064555
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064557
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000064558
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000064559
A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one vacuum pump, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the
- OT-2026-000064561
A suction-cup vacuum gripping tool comprising one tool-change interface, six suction cups, one plant vacuum connection, one manifold, one pressure sensor, one contact detector and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiec
- OT-2026-000064562
A foam-pad vacuum gripping tool comprising one tool-change interface, three foam pads, one ejector, one manifold, one pressure sensor and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vente
- OT-2026-000064563
A zoned vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, four zone branches, four pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down positio