Valves and Manifolds

Valves and Manifolds within Fluid Power.

Category CAT-000000230

Publications

• OT-2026-000100059
  Foam pad vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,542 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100060
  Foam pad vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,456 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000100061
  Foam pad vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,561 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100062
  Foam pad vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,527 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100063
  Three cup vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100064
  Three cup vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,524 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100065
  Three cup vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,490 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100066
  Three cup vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100067
  Three cup vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,524 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100068
  Three cup vacuum gripper, three zone face, per zone isolation, single stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,490 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100069
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,431 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100070
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,536 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100071
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,502 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100072
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,431 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100073
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,536 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100074
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,502 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100075
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,431 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100076
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,536 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100077
  Three bellows cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,502 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100078
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,471 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000100079
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,576 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100080
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,542 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100081
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,456 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000100082
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,561 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100083
  Foam pad vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,527 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100084
  Three cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100085
  Three cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,524 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100086
  Three cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,490 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100087
  Three cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100088
  Three cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,524 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100089
  Three cup vacuum gripper, three zone face, per zone isolation, two stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,490 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100090
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,431 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100091
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,536 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100092
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,502 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100093
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,431 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100094
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,536 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100095
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,502 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100096
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,431 words

  A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100097
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,536 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100098
  Three bellows cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,502 words

  A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workp

• OT-2026-000100099
  Foam pad vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,471 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000100100
  Foam pad vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,576 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100101
  Foam pad vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,542 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100102
  Foam pad vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,456 words

  A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the se

• OT-2026-000100103
  Foam pad vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,561 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100104
  Foam pad vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,527 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches

• OT-2026-000100105
  Three cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r

• OT-2026-000100106
  Three cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,524 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100107
  Three cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,490 words

  A zoned vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workp

• OT-2026-000100108
  Three cup vacuum gripper, three zone face, per zone isolation, three stage ejector, pressure sensor per zone, sustained blow-off before set-down
  September 17, 2026 · Vacuum Grippers · 1,419 words

  A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches, three pressure sensors, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece r