Industrial Motion & Power Transmission
Drives, transmissions, actuators and the components that carry motion into a machine.
Category CAT-000000206
Subcategories
Publications
- OT-2026-000006714
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup that h
- OT-2026-000006713
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered suction cup is an op
- OT-2026-000006712
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuat
- OT-2026-000006711
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a vent valve (20). The arrangement addresses changing the tool between jobs without rewiring the
- OT-2026-000006710Vacuum cup gripper, six outlet manifold, plant vacuum fed, vented before set down, polyurethane cups
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing bef
- OT-2026-000006709
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a vent valve (16). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported
- OT-2026-000006708
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a ve
- OT-2026-000006706
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses knowing that the workpiece is
- OT-2026-000006705
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an unc
- OT-2026-000006704
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed
- OT-2026-000006702
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air contin
- OT-2026-000006701
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a manifold (16), a pressure sensor (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air con
- OT-2026-000006700
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported d
- OT-2026-000006699
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedica
- OT-2026-000006698
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed ai
- OT-2026-000006697
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a vent valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, where e
- OT-2026-000006696
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed
- OT-2026-000006695
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a contact detector (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air
- OT-2026-000006694
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reach
- OT-2026-000006693
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a ven
- OT-2026-000006692
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece
- OT-2026-000006691
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejector
- OT-2026-000006690
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, whe
- OT-2026-000006689
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same heigh
- OT-2026-000006688
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses starting the vacuum at the right moment in the ap
- OT-2026-000006686Porous face vacuum gripper, two stage ejector, contact triggered, sustained blow off before set down
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup relea
- OT-2026-000006684
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiec
- OT-2026-000006683
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a pressure sensor (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air c
- OT-2026-000006682
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a pressure sensor (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a c
- OT-2026-000006681
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends comp
- OT-2026-000006679
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smoot
- OT-2026-000006678
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported dro
- OT-2026-000006677
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses knowing that the workpiece is actually held before
- OT-2026-000006676
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20). The arrangement addresses changing the tool between jobs without rewiri
- OT-2026-000006675
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a contact detector (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pu
- OT-2026-000006674
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating bef
- OT-2026-000006673
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releas
- OT-2026-000006672Porous face vacuum gripper, three outlet manifold, two stage ejector, pressure verified, closed cell
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a pressure sensor (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup that has not sealed looks t
- OT-2026-000006671
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses changing the tool between jobs without
- OT-2026-000006670
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evac
- OT-2026-000006668
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuati
- OT-2026-000006667
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses knowing that the workpiece is act
- OT-2026-000006666
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the wor
- OT-2026-000006665
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup th
- OT-2026-000006664
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a vent valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pu
- OT-2026-000006662
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a sm
- OT-2026-000006661
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated to
- OT-2026-000006660
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece fa
- OT-2026-000006659
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air contin
- OT-2026-000006658
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches the workp