Industrial Motion & Power Transmission
Drives, transmissions, actuators and the components that carry motion into a machine.
Category CAT-000000206
Subcategories
Publications
- OT-2026-000004546
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at
- OT-2026-000004545
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses knowing that the workpiece is actually held b
- OT-2026-000004544
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpie
- OT-2026-000004543
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workp
- OT-2026-000004541Porous face vacuum gripper, common isolation valve, two outlet manifold, pump fed, pressure verified
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses handling workpieces that do not cover the
- OT-2026-000004540
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is
- OT-2026-000004537
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at th
- OT-2026-000004536
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring the cel
- OT-2026-000004535
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowin
- OT-2026-000004533
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses kno
- OT-2026-000004524
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses knowing that the workpiece is a
- OT-2026-000004523
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses handli
- OT-2026-000004522
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigi
- OT-2026-000004521
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses starting the
- OT-2026-000004520
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same height,
- OT-2026-000004519
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pump
- OT-2026-000004518
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at
- OT-2026-000004517
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses ha
- OT-2026-000004515
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without it s
- OT-2026-000004513
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that
- OT-2026-000004512
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses ha
- OT-2026-000004511
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continu
- OT-2026-000004510
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at the spe
- OT-2026-000004509
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses starting
- OT-2026-000004508
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the
- OT-2026-000004507
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses knowing that the workpiece is actuall
- OT-2026-000004506
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses knowing th
- OT-2026-000004505
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece is let go, where r
- OT-2026-000004504
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses handling workpieces that do not
- OT-2026-000004503
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the
- OT-2026-000004502
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the va
- OT-2026-000004501
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly
- OT-2026-000004500Porous face vacuum gripper, six outlet manifold, pump fed, pressure verified, vented before set down
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where
- OT-2026-000004499
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses handling workpieces that do no
- OT-2026-000004497
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses knowing that the workpiece is actually held befor
- OT-2026-000004496
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workp
- OT-2026-000004495
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses
- OT-2026-000004493
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at
- OT-2026-000004492
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses controlling the moment the wor
- OT-2026-000004491
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses starting the vacuum at the right moment in
- OT-2026-000004490
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without it s
- OT-2026-000004489
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses starting the vacuum at the right moment in the approach, wher
- OT-2026-000004488
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the ri
- OT-2026-000004487
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses controlling the moment th
- OT-2026-000004486
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses handli
- OT-2026-000004485
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses handling workpieces that do
- OT-2026-000004484
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, whe
- OT-2026-000004483
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a ve
- OT-2026-000004482
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a contact detector (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs
- OT-2026-000004481
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the wor