Lifting, Positioning & Manipulation
Equipment that raises, orients and holds loads, including balancers, manipulators and lift tables.
Category CAT-000000154
Subcategories
Publications
- OT-2026-000005859
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000005857
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece
- OT-2026-000005856
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the
- OT-2026-000005854
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring the
- OT-2026-000005852
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiec
- OT-2026-000005851
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, w
- OT-2026-000005850
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same height, where a r
- OT-2026-000005849
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the r
- OT-2026-000005847
An end effector for mechanical gripping end effectors for robotic handling is described. The tool comprises a mounting flange (10), a gripper finger (12), a ejector (14), a separating element (16). The arrangement addresses separating a workpiece that stays on the face after the grip is released, where a thin or slight
- OT-2026-000005844
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool pe
- OT-2026-000005843
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before the face touch
- OT-2026-000005842
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a pressure sensor (16), a vent valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that re
- OT-2026-000005841
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece is let
- OT-2026-000005840
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece family me
- OT-2026-000005838
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a pressure sensor (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000005837
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the approach,
- OT-2026-000005836
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where
- OT-2026-000005835
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses starting the vacuum at the right mo
- OT-2026-000005834
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresse
- OT-2026-000005833
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating be
- OT-2026-000005832
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses choosing where the vacuum comes f
- OT-2026-000005831
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before the face touches
- OT-2026-000005829
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a blow-off valve (16). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth c
- OT-2026-000005827
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating
- OT-2026-000005826
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses changing the tool between jobs without rewiring the
- OT-2026-000005822
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the
- OT-2026-000005820
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000005818
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, w
- OT-2026-000005817
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedi
- OT-2026-000005816
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a v
- OT-2026-000005815Porous face vacuum gripper, common isolation valve, plant vacuum fed, contact triggered, closed cell
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating b
- OT-2026-000005814
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth
- OT-2026-000005813
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece
- OT-2026-000005812
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated
- OT-2026-000005811
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejector
- OT-2026-000005810
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without it sticking to
- OT-2026-000005809
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches the
- OT-2026-000005808
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000005807
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum
- OT-2026-000005806
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reache
- OT-2026-000005805
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth
- OT-2026-000005804
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a pressure sensor (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the
- OT-2026-000005803
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a blow-off valve (16). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at the
- OT-2026-000005802
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the wo
- OT-2026-000005801
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses starting the vacuum at the right moment
- OT-2026-000005800
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same heigh
- OT-2026-000005799Bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, contact triggered
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses starting the vacuum at the right mom
- OT-2026-000005798
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a
- OT-2026-000005797
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigi
- OT-2026-000005796
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a contact detector (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated to