Lifting, Positioning & Manipulation
Equipment that raises, orients and holds loads, including balancers, manipulators and lift tables.
Category CAT-000000154
Subcategories
Publications
- OT-2026-000003872
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches t
- OT-2026-000003871
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses handling w
- OT-2026-000003870
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses starting the v
- OT-2026-000003868
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses starting th
- OT-2026-000003867
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the work
- OT-2026-000003866
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without
- OT-2026-000003865
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicate
- OT-2026-000003864
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot
- OT-2026-000003862
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing
- OT-2026-000003861
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses controlling the mo
- OT-2026-000003860
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses handling workpieces tha
- OT-2026-000003859
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down qui
- OT-2026-000003857
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses knowing that the workpiece is a
- OT-2026-000003856
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the mome
- OT-2026-000003854
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses starting the vacuum at t
- OT-2026-000003852
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a pressure sensor (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a c
- OT-2026-000003850
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sti
- OT-2026-000003849
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid c
- OT-2026-000003848
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece
- OT-2026-000003846
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticki
- OT-2026-000003845
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses handling workpieces tha
- OT-2026-000003844
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses holding a porous or uneven workpiece th
- OT-2026-000003843
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses starting the vacuum at
- OT-2026-000003842
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right
- OT-2026-000003841
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a pressure sensor (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth c
- OT-2026-000003840
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuu
- OT-2026-000003839
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuous
- OT-2026-000003838
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece i
- OT-2026-000003836
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement ad
- OT-2026-000003835
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the
- OT-2026-000003834
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is act
- OT-2026-000003833
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid c
- OT-2026-000003832
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a r
- OT-2026-000003831
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that the workpiece
- OT-2026-000003830
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses handling workpieces that do no
- OT-2026-000003828Bellows cup vacuum gripper, per zone isolation, four outlet manifold, ejector fed, contact triggered
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses handling workpieces that do not co
- OT-2026-000003827
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece i
- OT-2026-000003826
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without i
- OT-2026-000003825
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that the wor
- OT-2026-000003822
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses s
- OT-2026-000003821
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment in the
- OT-2026-000003819
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring the cel
- OT-2026-000003818
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it
- OT-2026-000003817
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses controll
- OT-2026-000003816
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the ap
- OT-2026-000003815
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing
- OT-2026-000003812
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses starting the
- OT-2026-000003811
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down qu
- OT-2026-000003810
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses handling workpieces that do not cover the who
- OT-2026-000003809
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a vent valve (20). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an u