Lifting, Positioning & Manipulation
Equipment that raises, orients and holds loads, including balancers, manipulators and lift tables.
Category CAT-000000154
Subcategories
Publications
- OT-2026-000003559
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses choosing where the vacuum comes from,
- OT-2026-000003558
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that t
- OT-2026-000003557
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses knowing that the workpiece is act
- OT-2026-000003556
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses hand
- OT-2026-000003555
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a
- OT-2026-000003554
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a blow-off valve (20). The arrangement addresses handling workpieces that do not cover the whole
- OT-2026-000003553
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs wit
- OT-2026-000003552
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses knowing that the workpiece is actual
- OT-2026-000003551Bellows cup vacuum gripper, four zone face, per zone isolation, two stage ejector, pressure verified
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing
- OT-2026-000003550
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is a
- OT-2026-000003549
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses starting
- OT-2026-000003547
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that the workpiece
- OT-2026-000003545
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed ai
- OT-2026-000003544
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking to the
- OT-2026-000003543
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the work
- OT-2026-000003542
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the va
- OT-2026-000003541
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses handling workpieces that do not cover the whole gripping
- OT-2026-000003540
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking
- OT-2026-000003539
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses gripping workpieces that are not at the same heigh
- OT-2026-000003538
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses starting the v
- OT-2026-000003536
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses handling workpieces tha
- OT-2026-000003535
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses know
- OT-2026-000003534
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrange
- OT-2026-000003533
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a c
- OT-2026-000003532
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is
- OT-2026-000003531
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously
- OT-2026-000003530
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses gripping workpieces that are not at the same height
- OT-2026-000003529
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses knowing that the workpiece is actually held before th
- OT-2026-000003528
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a vent valve (24). The arrangement addresses handl
- OT-2026-000003527
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement
- OT-2026-000003526
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a blow-off valve (20). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an unc
- OT-2026-000003525
An end effector for mechanical gripping end effectors for robotic handling is described. The tool comprises a tool-change interface (10), a gripper finger (12), a ejector (14), a contact detector (16), a separating element (18). The arrangement addresses starting the vacuum at the right moment in the approach, where ev
- OT-2026-000003524
An end effector for magnetic end-of-arm tooling for ferrous workpieces is described. The tool comprises a tool-change interface (10), a magnet assembly (12), a ejector (14), a separating element (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiec
- OT-2026-000003522
An end effector for mechanical gripping end effectors for robotic handling is described. The tool comprises a tool-change interface (10), a gripper finger (12), a ejector (14), a contact detector (16), a separating element (18). The arrangement addresses separating a workpiece that stays on the face after the grip is r
- OT-2026-000003519
An end effector for mechanical gripping end effectors for robotic handling is described. The tool comprises a tool-change interface (10), a gripper finger (12), a ejector (14), a contact detector (16), a separating element (18). The arrangement addresses gripping a workpiece whose surface cannot be sealed or magnetised
- OT-2026-000003518
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated
- OT-2026-000003517
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a contact detector (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuou
- OT-2026-000003516
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go
- OT-2026-000003515
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a zone branch (16), a pressure sensor (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pump
- OT-2026-000003514
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking to the face, wher
- OT-2026-000003513
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses handling workpieces that do not cover the whole
- OT-2026-000003511
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported dr
- OT-2026-000003510
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses gripping workpieces that are not at the same heigh
- OT-2026-000003509
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a zone branch (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses choosing where the vacuum comes from,
- OT-2026-000003508
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece fam
- OT-2026-000003505
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement ad
- OT-2026-000003504
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid c
- OT-2026-000003503
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that the workpi
- OT-2026-000003502
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses handling workpieces that do not cover the whole g
- OT-2026-000003501
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement address