Sealing and Suction Pads
Sealing and Suction Pads within Vacuum Lifting.
Category CAT-000000175
Publications
- OT-2026-000005277
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating befor
- OT-2026-000005276
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same height, where
- OT-2026-000005275
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let g
- OT-2026-000005274
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a pressure sensor (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported
- OT-2026-000005273
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses knowing that the workpiece is act
- OT-2026-000005272
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a contact detector (16), a vent valve (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating bef
- OT-2026-000005269
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workp
- OT-2026-000005268
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuat
- OT-2026-000005267
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses holding a porous or uneven workpiece tha
- OT-2026-000005264
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it stic
- OT-2026-000005263
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same height, where a ri
- OT-2026-000005261
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid cup c
- OT-2026-000005259
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a blow-off valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously wh
- OT-2026-000005257
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it s
- OT-2026-000005254
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiec
- OT-2026-000005251
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses putting
- OT-2026-000005250
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses knowing that the workpiece is actually
- OT-2026-000005249
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly without it sticki
- OT-2026-000005248
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuo
- OT-2026-000005247
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses gripping workpieces that are not at the same heigh
- OT-2026-000005246
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a zone branch (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated too
- OT-2026-000005244
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuatin
- OT-2026-000005243
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a
- OT-2026-000005242
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses controlling the moment the workp
- OT-2026-000005241
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses knowing that the workpiece is actually held befo
- OT-2026-000005239
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right m
- OT-2026-000005238
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where
- OT-2026-000005237
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is actually held befor
- OT-2026-000005234
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down q
- OT-2026-000005229
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000005228
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuat
- OT-2026-000005227
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece dow
- OT-2026-000005226
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smoo
- OT-2026-000005225
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to th
- OT-2026-000005224
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth con
- OT-2026-000005222
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a vent valve (20). The arrangement addresses handling workpieces that do not cover the whole grip
- OT-2026-000005220
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a pressure sensor (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth conti
- OT-2026-000005217
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a pressure sensor (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece family means a ro
- OT-2026-000005216
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rig
- OT-2026-000005213
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses changing the tool between jobs without rewiring
- OT-2026-000005212
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a manifold (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an uncovered suction cup i
- OT-2026-000005211
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece i
- OT-2026-000005208
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a ve
- OT-2026-000005204
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated
- OT-2026-000005202
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the w
- OT-2026-000005201
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum a
- OT-2026-000005200
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece famil
- OT-2026-000005199
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses kno
- OT-2026-000005198
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses handling workpieces that do no
- OT-2026-000005196
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same heigh