Sealing and Suction Pads
Sealing and Suction Pads within Vacuum Lifting.
Category CAT-000000175
Publications
- OT-2026-000004908
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down qu
- OT-2026-000004906
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a zone branch (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, w
- OT-2026-000004904
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses starting the vacuum at the right moment
- OT-2026-000004903
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly
- OT-2026-000004902
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20). The arrangement addresses handling workpieces that do not cover the whole gripping face, wher
- OT-2026-000004900
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a
- OT-2026-000004897
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, whe
- OT-2026-000004896
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement address
- OT-2026-000004893
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses gripping workpieces t
- OT-2026-000004890
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a pressure sensor (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup canno
- OT-2026-000004889
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses knowing that the workpiece is actually held before the arm
- OT-2026-000004887
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a contact detector (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, w
- OT-2026-000004886
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a vent valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejector
- OT-2026-000004883
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking to th
- OT-2026-000004882
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses putting the workpiece down q
- OT-2026-000004880
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a sm
- OT-2026-000004879
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses knowing that the workpiece is actu
- OT-2026-000004877
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000004876
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a pressure sensor (20). The arrangement addresses starting the vacuum at the right moment in the approac
- OT-2026-000004875
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a pressure sensor (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece f
- OT-2026-000004874
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in th
- OT-2026-000004873
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the mome
- OT-2026-000004872
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses starting the vacuum at the right mo
- OT-2026-000004871
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses starting the vacuum at the right moment in the a
- OT-2026-000004870
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses putt
- OT-2026-000004869
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the appr
- OT-2026-000004868
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot s
- OT-2026-000004865
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed a
- OT-2026-000004863
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses gripping workpieces that are not at the same h
- OT-2026-000004862Porous face vacuum gripper, four zone face, two outlet manifold, plant vacuum fed, pressure verified
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quickly w
- OT-2026-000004861Porous face vacuum gripper, four zone face, six outlet manifold, plant vacuum fed, contact triggered
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece is
- OT-2026-000004860
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece is let go, wh
- OT-2026-000004857
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses holding a porous or uneven workpiece that a rigid cup can
- OT-2026-000004855
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a pressure sensor (20). The arrangement addresses handling workpieces that do not cover the whole grippi
- OT-2026-000004854
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece is let go, where rel
- OT-2026-000004853
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quic
- OT-2026-000004850
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a contact detector (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to
- OT-2026-000004849
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a vent valve (22). The arrangement addresses handling workpieces that do
- OT-2026-000004848
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpie
- OT-2026-000004846
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses starting the vacuum at the righ
- OT-2026-000004845
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment in the
- OT-2026-000004843
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22). The arrangement addresses gripping workpieces that are no
- OT-2026-000004842
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air conti
- OT-2026-000004836
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quic
- OT-2026-000004833
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating bef
- OT-2026-000004832Bellows cup vacuum gripper, two zone face, six outlet manifold, two stage ejector, pressure verified
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses gripping workpieces that are not
- OT-2026-000004831
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangemen
- OT-2026-000004828
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a vent valve (22). The arrangement addresses controlling the moment the workpiece is let g
- OT-2026-000004827
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20). The arrangement addresses handling workpieces that do not cover the whole gripping face, where a
- OT-2026-000004822
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a vent valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smoo