Sealing and Suction Pads
Sealing and Suction Pads within Vacuum Lifting.
Category CAT-000000175
Publications
- OT-2026-000006917
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per work
- OT-2026-000006915
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses handling workpieces that do not cover the whole gripping face, where an unc
- OT-2026-000006913
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed a
- OT-2026-000006912
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a vent valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth contin
- OT-2026-000006908
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpie
- OT-2026-000006905
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a contact detector (16). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before the face touches the wor
- OT-2026-000006901Bellows cup vacuum gripper, three outlet manifold, ejector fed, vented before set down, plastic cups
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches the wor
- OT-2026-000006900
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same heigh
- OT-2026-000006899
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a contact detector (16), a pressure sensor (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before the face t
- OT-2026-000006897
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacu
- OT-2026-000006896
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a contact detector (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece fami
- OT-2026-000006894
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a zone branch (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedic
- OT-2026-000006893
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a pressure sensor (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup
- OT-2026-000006890
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses controlling the moment the workpiece is let go, where releasing befor
- OT-2026-000006888
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a vent valve (18). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the
- OT-2026-000006887
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pump
- OT-2026-000006886
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a vent valve (20). The arrangement addresses changing the tool between jobs without rewiring
- OT-2026-000006878
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a contact detector (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpie
- OT-2026-000006877
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reac
- OT-2026-000006876
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a contact detector (16), a pressure sensor (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating befo
- OT-2026-000006875
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a vent valve (20). The arrangement addresses starting the vacuum at the right moment in the approach,
- OT-2026-000006874
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at
- OT-2026-000006872
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating befor
- OT-2026-000006871
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches
- OT-2026-000006869
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedica
- OT-2026-000006868
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air contin
- OT-2026-000006865
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece
- OT-2026-000006864
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell,
- OT-2026-000006862
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a pressure sensor (16), a vent valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated
- OT-2026-000006861
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while
- OT-2026-000006860
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a vent valve (16). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece f
- OT-2026-000006858
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air contin
- OT-2026-000006857
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rig
- OT-2026-000006854
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it
- OT-2026-000006852
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating before t
- OT-2026-000006849
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating
- OT-2026-000006845
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated t
- OT-2026-000006842
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pump adds mass at
- OT-2026-000006841
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a vent valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cu
- OT-2026-000006840
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a pressure sensor (16), a vent valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth con
- OT-2026-000006839
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a vent valve (16). The arrangement addresses controlling the moment the workpiece is let go, where releasing before the workpiece is supported dr
- OT-2026-000006838
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a pressure sensor (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smo
- OT-2026-000006837
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a pressure sensor (18), and a vent valve (20). The arrangement addresses gripping workpieces that are not at the same height, where
- OT-2026-000006836
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a vent valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cu
- OT-2026-000006835
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a vent valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a p
- OT-2026-000006834
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that
- OT-2026-000006833
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a isolation valve (16), a manifold (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a smooth conti
- OT-2026-000006832
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicate
- OT-2026-000006831
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a ven
- OT-2026-000006829
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiece fam