Vacuum Safety Systems
Vacuum Safety Systems within Vacuum Lifting.
Category CAT-000000174
Publications
- OT-2026-000010289
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, two zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off v
- OT-2026-000010291
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the vac
- OT-2026-000010300
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vent
- OT-2026-000010307
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the
- OT-2026-000010309
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four isolation valves, four zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit i
- OT-2026-000009344
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000009347Single cup vacuum gripper, common isolation valve, plant vacuum fed, pulsed blow-off before set-down
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the wo
- OT-2026-000009352
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000009388
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000009389
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve
- OT-2026-000009392
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while the workpiece is
- OT-2026-000009413
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one manifold, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000009431
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection, three zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blow
- OT-2026-000009452
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off va
- OT-2026-000009461
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one pressure sensor and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the b
- OT-2026-000009472
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one isolation valve, two zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is ve
- OT-2026-000009496
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three isolation valves, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000009502
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent v
- OT-2026-000009535
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. T
- OT-2026-000009547
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the
- OT-2026-000009563
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000009570
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off va
- OT-2026-000009573
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one isolation valve, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000009576
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000009589
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve.
- OT-2026-000009592
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, three isolation valves, three zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circui
- OT-2026-000009599
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by t
- OT-2026-000009602
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000009607
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-of
- OT-2026-000009638
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000009639
A suction-cup vacuum gripping tool comprising one mounting flange, six suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000009680
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one plant vacuum connection, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpie
- OT-2026-000009724
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000009736
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000009741
A bellows-cup vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one isolation valve, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000009748
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000009749
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000009753
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the workpiece is blown
- OT-2026-000009754
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. Th
- OT-2026-000009757
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one manifold, three zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented b
- OT-2026-000009763
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one manifold, two zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is v
- OT-2026-000009770
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve, two zone branches and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000009774
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one pressure sensor and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the wo
- OT-2026-000009775
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, two isolation valves, two zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circ
- OT-2026-000009776
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one pressure sensor and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000009781
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one contact detector and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while
- OT-2026-000009810
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the
- OT-2026-000008831
A foam-pad vacuum gripping tool comprising one mounting flange, two foam pads, one ejector, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. Th
- OT-2026-000008839
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, two zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while
- OT-2026-000008861
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo