Vacuum Safety Systems
Vacuum Safety Systems within Vacuum Lifting.
Category CAT-000000174
Publications
- OT-2026-000006440
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per work
- OT-2026-000006439
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vente
- OT-2026-000006438
An end effector for mechanical gripping end effectors for robotic handling is described. The tool comprises a mounting flange (10), a gripper finger (12), a ejector (14), a separating element (16). The arrangement addresses separating a workpiece that stays on the face after the grip is released, where a thin or slight
- OT-2026-000006426
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air co
- OT-2026-000006417
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases a
- OT-2026-000006416
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a de
- OT-2026-000006413Vacuum cup gripper, ejector fed, pressure verified, sustained blow off after set down, silicone cups
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup
- OT-2026-000006409
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a blow-off valve (16). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases
- OT-2026-000006406
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a
- OT-2026-000006404
An end effector for magnetic end-of-arm tooling for ferrous workpieces is described. The tool comprises a tool-change interface (10), a magnet assembly (12), a ejector (14), a contact detector (16), a separating element (18). The arrangement addresses separating a workpiece that stays on the face after the grip is rele
- OT-2026-000006402
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses gripping workpieces that are not at the same heig
- OT-2026-000006394
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that r
- OT-2026-000006392
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a blow-off valve (16). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at
- OT-2026-000006378
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to
- OT-2026-000006377
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking to the face,
- OT-2026-000006376
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air conti
- OT-2026-000006374
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a vented cup releases at
- OT-2026-000006373
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed
- OT-2026-000006368
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, where a
- OT-2026-000006366
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reac
- OT-2026-000006362
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuati
- OT-2026-000006361
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reach
- OT-2026-000006357
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a contact detector (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends
- OT-2026-000006354
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reach
- OT-2026-000006353
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup
- OT-2026-000006351
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell
- OT-2026-000006350
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the fac
- OT-2026-000006349
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, w
- OT-2026-000006346
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a zone branch (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spend
- OT-2026-000006345
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, wher
- OT-2026-000006339
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a zone branch (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends comp
- OT-2026-000006336
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses holding a porous or uneven workpiec
- OT-2026-000006331
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuo
- OT-2026-000006330
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool per workpiec
- OT-2026-000006328
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, wher
- OT-2026-000006327
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated tool
- OT-2026-000006323
An end effector for magnetic end-of-arm tooling for ferrous workpieces is described. The tool comprises a tool-change interface (10), a magnet assembly (12), a contact detector (14), a separating element (16). The arrangement addresses handling ferrous workpieces without a vacuum circuit at all, where a vacuum tool on
- OT-2026-000006322
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedic
- OT-2026-000006320
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiec
- OT-2026-000006307
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses knowing that the workpiece is actually
- OT-2026-000006305
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a rigid lip needs a
- OT-2026-000006302
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece i
- OT-2026-000006293
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses gripping workpieces that are not at the same height, where
- OT-2026-000006288
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup that reaches the
- OT-2026-000006285
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses gripping workpieces that are not at the same hei
- OT-2026-000006282
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a pressure sensor (16), a blow-off valve (18). The arrangement addresses knowing that the workpiece is actually held before the arm moves, where a cup that has not se
- OT-2026-000006280
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a blow-off valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pump adds mass at the too
- OT-2026-000006279
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuating bef
- OT-2026-000006277
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses knowing that the workpiece is actually held before
- OT-2026-000006275
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a zone branch (16), a blow-off valve (18). The arrangement addresses gripping workpieces that are not at the same height, where a rigid cup tha