Vacuum Safety Systems
Vacuum Safety Systems within Vacuum Lifting.
Category CAT-000000174
Publications
- OT-2026-000005086
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where a dedicated
- OT-2026-000005085
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the approach, where evacuat
- OT-2026-000005084
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air co
- OT-2026-000005083
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpi
- OT-2026-000005082
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a vacuum pump (14), a isolation valve (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses gripping workpieces that are not at the same he
- OT-2026-000005081
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a contact detector (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment in the ap
- OT-2026-000005079
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup c
- OT-2026-000005078
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a blow-off valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a pump adds mass at the too
- OT-2026-000005077
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a vacuum pump (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses star
- OT-2026-000005076
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece
- OT-2026-000005075
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a blow-off valve (16). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuously while a
- OT-2026-000005073
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is actually held before
- OT-2026-000005071
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is actually held bef
- OT-2026-000005069
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a zone branch (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece is actually held
- OT-2026-000005068
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses putting the workpiece down
- OT-2026-000005067
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement ad
- OT-2026-000005066
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejecto
- OT-2026-000005065
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a plant vacuum connection (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right mo
- OT-2026-000005061
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses changing the tool between jobs without rewiring
- OT-2026-000005059
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses handling workpieces that do not cov
- OT-2026-000005058
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses handling workpieces tha
- OT-2026-000005057
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment in the approa
- OT-2026-000005053
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses choosing where the vacuum comes from, where an ejecto
- OT-2026-000005052
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a zone branch (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses handling workpieces that d
- OT-2026-000005051
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses hand
- OT-2026-000005050
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a contact detector (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the face, whe
- OT-2026-000005049
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the r
- OT-2026-000005048
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses puttin
- OT-2026-000005046
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a isolation valve (16), a manifold (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses handling workpieces that do n
- OT-2026-000005045
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a blow-off valve (18). The arrangement addresses changing the tool between jobs without rewiring the cell, where
- OT-2026-000005039
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right moment
- OT-2026-000005038
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a blow-off valve (18). The arrangement addresses choosing where the vacuum comes from, where an ejector spends compressed air continuo
- OT-2026-000005037
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment in the appr
- OT-2026-000005034
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without it sticking to the face,
- OT-2026-000005033
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a blow-off valve (18). The arrangement addresses putting the workpiece down quickly without it sticking to the
- OT-2026-000005032
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a isolation valve (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses knowing that the workpiece is actually held
- OT-2026-000005031
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a ejector (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses knowing that the workpiece
- OT-2026-000005029
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses putting the workpiece down q
- OT-2026-000005028
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup cannot seal, where a ri
- OT-2026-000005026
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a isolation valve (16), a manifold (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses handling workpieces th
- OT-2026-000005022
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a manifold (16), a contact detector (18), and a pressure sensor (20), a blow-off valve (22). The arrangement addresses starting the vacuum at
- OT-2026-000005019
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a mounting flange (10), a suction cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that
- OT-2026-000005018
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses putting the workpiece down quick
- OT-2026-000005017
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a vacuum pump (14), a zone branch (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses putting the workpiece down quickly without
- OT-2026-000005015
An end effector for vacuum end-of-arm tooling for robotic material handling is described. The tool comprises a tool-change interface (10), a suction cup (12), a plant vacuum connection (14), a isolation valve (16), a manifold (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangem
- OT-2026-000005014
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a mounting flange (10), a bellows cup (12), a plant vacuum connection (14), a isolation valve (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses knowing that the workpiece is actual
- OT-2026-000005013
An end effector for vacuum end-of-arm tooling with compliant bellows cups is described. The tool comprises a tool-change interface (10), a bellows cup (12), a plant vacuum connection (14), a manifold (16), a contact detector (18), and a blow-off valve (20). The arrangement addresses starting the vacuum at the right mom
- OT-2026-000005012
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a plant vacuum connection (14), a zone branch (16), a pressure sensor (18), and a blow-off valve (20). The arrangement addresses holding a porous or uneven workpiece that a rigid cup canno
- OT-2026-000005011
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a tool-change interface (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a pressure sensor (22), a blow-off valve (24). The arrangement addresses knowing that the workpiece
- OT-2026-000005010
An end effector for porous-face vacuum end-of-arm tooling is described. The tool comprises a mounting flange (10), a foam pad (12), a ejector (14), a manifold (16), a zone branch (18), and a contact detector (20), a blow-off valve (22). The arrangement addresses starting the vacuum at the right moment in the approach,