Vacuum Safety Systems
Vacuum Safety Systems within Vacuum Lifting.
Category CAT-000000174
Publications
- OT-2026-000011135
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve
- OT-2026-000011146
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workpiece is blown off by
- OT-2026-000011149
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The
- OT-2026-000011161
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve while th
- OT-2026-000011163
A foam-pad vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off valve. The
- OT-2026-000011169
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while t
- OT-2026-000011170
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one vacuum pump, one isolation valve, two zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circu
- OT-2026-000011176
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000011185
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three isolation valves, three zone branches and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuu
- OT-2026-000011186
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, four zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000011188
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve wh
- OT-2026-000011189
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the b
- OT-2026-000011193
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ve
- OT-2026-000011208
A zoned vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, three zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000011214
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000011220
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one isolation valve and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The
- OT-2026-000011224
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one vacuum pump, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000011229
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one plant vacuum connection, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is ven
- OT-2026-000011235
A foam-pad vacuum gripping tool comprising one mounting flange, three foam pads, one vacuum pump, one manifold and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011240
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off valve whil
- OT-2026-000011241
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one vacuum pump and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011246
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000011248
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one ejector, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011249
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one ejector, one pressure sensor and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The
- OT-2026-000011254
A foam-pad vacuum gripping tool comprising one mounting flange, one foam pad, one plant vacuum connection and one vent valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent va
- OT-2026-000011255
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent val
- OT-2026-000011257
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, three zone branches and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by th
- OT-2026-000011260
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the
- OT-2026-000011265
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent va
- OT-2026-000011272
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one pressure sensor and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by
- OT-2026-000011275Three bellows cup vacuum gripper, three outlet manifold, three stage ejector, vented before set-down
A bellows-cup vacuum gripping tool comprising one mounting flange, three bellows cups, one ejector, one manifold and one vent valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valv
- OT-2026-000011278
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000011280
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one vacuum pump, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve.
- OT-2026-000011283
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-o
- OT-2026-000011288
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000011297
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the vent valve. The arrangem
- OT-2026-000011302
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one vacuum pump and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000011304
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is vented by the ven
- OT-2026-000010312
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one pressure sensor and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow
- OT-2026-000010314
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one plant vacuum connection, one isolation valve, one manifold and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the
- OT-2026-000010317
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, four zone branches and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off
- OT-2026-000010318
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one contact detector and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. After the workpiece has reached the set-down position, the workpiece is blown off by the
- OT-2026-000010319
A bellows-cup vacuum gripping tool comprising one tool-change interface, one bellows cup, one ejector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent valve while the
- OT-2026-000010329
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, four zone branches and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the workpiece is blown off by the blow-off val
- OT-2026-000010331
A suction-cup vacuum gripping tool comprising one mounting flange, four suction cups, one ejector, one isolation valve, one manifold and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. After the workpiece has reached the set-down position, the vacuum circuit is
- OT-2026-000010335
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection and one blow-off valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. After the workpiece has reached the set-down position, the workpiece is b
- OT-2026-000010337Four cup vacuum gripper, four zone face, per zone isolation, plant vacuum fed, vented after set-down
A zoned vacuum gripping tool comprising one mounting flange, four suction cups, one plant vacuum connection, four isolation valves, four zone branches and one vent valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-dow
- OT-2026-000010344
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one blow-off valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece is blown off by the blo
- OT-2026-000010355
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one ejector, one contact detector and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circuit is vented by the vent
- OT-2026-000010359
A bellows-cup vacuum gripping tool comprising one mounting flange, one bellows cup, one vacuum pump, one isolation valve and one vent valve. When the bellows cup reaches the workpiece, the bellows cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the vacuum circuit is vented by th