Tool Changers

Tool Changers within End Effectors.

Category CAT-000000055

Publications

• OT-2026-000086798
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086800
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086801
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086803
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086804
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,166 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086806
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,186 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086807
  Foam pad vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,151 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086809
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086810
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086812
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086813
  Two cup vacuum gripper, two zone face, four outlet manifold, single stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086815
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086816
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086818
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086819
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086821
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086822
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086824
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086825
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,166 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086827
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,186 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086828
  Foam pad vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,151 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086830
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086831
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086833
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086834
  Two cup vacuum gripper, two zone face, four outlet manifold, two stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086836
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086837
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086839
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086840
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086842
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,161 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086843
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,126 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086845
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,201 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086846
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,166 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086848
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,186 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086849
  Foam pad vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,151 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiece

• OT-2026-000086851
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086852
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086854
  Two cup vacuum gripper, two zone face, four outlet manifold, three stage ejector, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,114 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-down position, th

• OT-2026-000086856
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,144 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086857
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086859
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,144 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086860
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086862
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,144 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086863
  Two bellows cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,109 words

  A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086865
  Foam pad vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,184 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000086866
  Foam pad vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,149 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000086868
  Foam pad vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,169 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000086869
  Foam pad vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,134 words

  A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the plant vacuum connection. Before the workpiece reaches the

• OT-2026-000086871
  Two cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,132 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece r

• OT-2026-000086872
  Two cup vacuum gripper, two zone face, four outlet manifold, plant vacuum fed, sustained blow-off before set-down, on a tool changer
  September 17, 2026 · Vacuum Grippers · 1,097 words

  A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one plant vacuum connection, one manifold, two zone branches, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the plant vacuum connection. Before the workpiece r